The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares MGX-21 Cali 1400 All Categories

Sort by Title

Sort by Price

Page 7 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Sealing Washer

SIA97497 Fits 1200 Sport (4 valves per cylinder), Cali 1400, Norge 1200 (4 valves per cylinder), Stelvio

Dimensions:
18mm outer diameter x 14mm inner diameter x 1.5mm

Sealing washer with rubber insert used for head oil feed pipes

part in stock More than 5 in stock

976597 MG976597

£0.80

INC VAT

£0.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Female Bullet Connector Medium

ELA10007 Universal Part

Insulated medium female bullet connector

Crimp type

part in stock More than 5 in stock

this part is no longer available
Sorry this item is out of production

Crush Washer Aluminium

SIA10200 Universal Part

Dimensions:
16.2mm x 22mm x 1.4mm

Aluminium crush washer

Various applications e.g. tacho drive plug seal models with electronic tacho or without tacho, oil line seal on Cali 1100 breather, oil pressure switch adapter on small twins and sump plug on V11 Sport. Also known as Guzzi ref. 95100602. Can be used in place of Piaggio ref. 287174

part in stock More than 5 in stock

10154200 GU10154200 10 15 42 00
1015 4200 1015.4200 10.15.42.00

£0.80

INC VAT

£0.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Crank Oil Seal Rear

ENA90367 Fits V7 Sport, 750 S3, 750S, V7 700, V7 Special (1969-1971), 850 GT, 850/1000 All Models, 1100 Sport ALL, 1200 Sport, Centauro, Daytona, Quota ALL, Cali 1100 (1994-1997), Cali EV, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Strada 750, 750 Targa, 750 SP, Nevada 350 (1991-1998), Nevada 750 (1991-1998), V11 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Stelvio, Norge, Griso, Cali 1400 ALL

Dimensions:
68mm OD

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

part in stock More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Male Bullet Connector Medium

ELA10006 Universal Part

Insulated medium bullet connector

Crimp type

part in stock More than 5 in stock

this part is no longer available
Sorry this item is out of production

M5 Flanged Screw Stainless Steel

SSA81522 Fits V7 Classic, V7 Stone, V7 Special, V7 Racer, V7 II ALL, V7 Cafe, Stelvio, 1200 Sport, Norge ALL, Griso ALL, Breva ALL, Bellagio, Nevada 750 (2004-2013), Cali 1400

Dimensions:
M5 x 16mm

Stainless steel M5 flanged screw, many applications

NB this is not identical to Guzzi part AP8152298 but can be used in its place as a corrosion free alternative

part in stock More than 5 in stock

AP8152298

£1.20

INC VAT

£1.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Socket Cap Screw M6 x 50mm Stainless Steel

SSA06050 Universal Part

Dimensions:
M6 x 50mm

A2 stainless socket cap screw M6 x 50, used for rocker cover bolt on 2 valve Breva 1100, Sport 1200, Cali Vintage, Norge etc... and Daytona and Centauro. 8 bolts required for these applications.

part in stock More than 5 in stock

05025932 GU05025932 05 02 59 32
0502 5932 0502.5932 05.02.59.32

£0.90

INC VAT

£0.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Socket Cap Screw M10 x 25mm Stainless Steel

SSA10025 Universal Part

Dimensions:
M10 x 25mm

A2 stainless socket cap screw M10 x 25, used for headlamp mount, F08 / P8 lower front caliper mounting and other applications

Lower front caliper bolt on many Tonti models

part in stock More than 5 in stock

£1.50

INC VAT

£1.25 EX VAT this is the price you will pay if you are ordering from outside the UK

HT Lead Coil Connector Crimp Type

ELA00001 Universal Part

Dimensions:
20mm long x 8mm OD

Crimp on HT lead connector, also used on loop frame distributors

We recommend checking your bike uses this type of connector before purchasing

part in stock More than 5 in stock

£1.20

INC VAT

£1.00 EX VAT this is the price you will pay if you are ordering from outside the UK

M6 Crush Washer Aluminium

SIA95116 Universal Part

Dimensions:
6mm x 10mm x 1mm

Aluminium M6 crush washer used for fork oil drain plug and many other applications depending on model

part in stock More than 5 in stock

95100116 GU95100116 95 10 01 16
9510 0116 9510.0116 95.10.01.16

£0.40

INC VAT

£0.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 7 of 33

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33